Model: YGX-DS110E Digital column type load cell
Features & Applications:
Alloy steel sensor elastomer; rubber seal or welding seal the deal, nickel-plated, waterproof, anti-corrosion, protection grade IP66 & IP68.
Widely used in industrial process for control force, batching control systems and testing equipment, and other equipment weighing force measurement.
Capacity: 10T,20T,30T,40T,50T
Installation size (mm):
Specification（Digital signal）
| Comprehensive error (%FS) |
±0.02%FS |
| Rated output |
1,000,000 counts |
| Creep |
±0.02%F.S/30min |
| Temp. effect on span( |
±0.02%F.S/10℃ |
| Temp. effect on zero |
±0.02%F.S/10℃ |
| Operating temp. range |
-20~+60℃ |
| Excitation voltage |
9～12VDC |
| Baud rate range |
9600BPS |
| Communication interface |
RS485 / RS232 |
| Date update interval |
50HZ |
| Max verification interval |
5000 n max |
| Max transmission range |
1000m |
| Address bus |
32 max |
| Safe overload |
150%F.S. |
| Ultimate overload |
200 %F.S. |
| Grade of protection |
IP68 |
Note: It is used 6-core shielded cable: (φ5×16000mm)
|
Installations:
Without increasing costs, weighbridge increase 7 big selling point right away!
1. Super shock resistance (the biggest difference points of working principle between column and bridge sensor).
2. It can be used in water (fully sealed structure, it can work 10 meters underwater)
3. It can work in all kinds of dust, fine sand flying up in the air and other severe environment (ball head is not exposed)
4. It can work in the freezing cold environments. (Sensor is hermetically sealed, ball will not freeze)
5. Scale body infinite place can withstand lateral impact (sensor comes with reset function)
6. Long-term accuracy and stability time doubled (because there is no hard spherical indenter resulting indentation produced, little change in the long-term accuracy)
7. It has compatible mounting dimensions with the existing platform sensors in markets, easy maintenance, and reduce the installation requirements (the centring requirement reduced when sensor installed that allows the center shifted laterally 5 mm without affecting the accuracy )
