Model: YGX-CL110E
Features & Applications:
Alloy steel sensor elastomer; rubber seal or welding seal the deal, nickel-plated, waterproof, anti-corrosion, protection grade IP66 & IP68.
Widely used in industrial process for control force, batching control systems and testing equipment, and other equipment weighing force measurement.
Capacity: 10T,20T,30T,40T,50T
Installation size (mm):
Specification (Analog signal)
|
Accuracy
|
|
C2
|
C3
|
|
Max No. of verification intervals
|
n max
|
2000
|
3000
|
|
Min load cell verification intervals
|
V min
|
Emax/5000
|
Emax/10000
|
|
Comprehensive error (%FS)
|
%FS
|
≤±0.030
|
≤±0.020
|
|
Creep
|
%F.S/30min
|
≤±0.023
|
≤±0.016
|
|
Temp. effect on span
|
%F.S/10℃
|
≤±0.017
|
≤±0.011
|
|
Temp. effect on zero(
|
%F.S/10℃
|
≤±0.023
|
≤±0.015
|
|
Rated output
|
mV/V
|
2±0.002
|
|
Input resistance
|
Ω
|
700±5
|
|
Output resistance
|
Ω
|
700±5
|
|
Insulation resistance
|
MΩ
|
≥5000(100VDC)
|
|
Zero balance
|
%FS
|
±1.0
|
|
Compensated temp. range
|
℃
|
-10～+40
|
|
Operating temp. range
|
℃
|
-30～+70
|
|
Excitation voltage, recommended
|
V
|
5～12DC
|
|
Excitation voltage, Max
|
V
|
18DC
|
|
Safe overload
|
%FS
|
150%
|
|
Ultimate overload
|
%FS
|
200%
|
|
Grade of protection
|
|
IP68
|
|
Notes：It used 4-core shielded cable(φ5×12000mm)
|
|
Wiring schematic diagram
|
Red: Input ( ＋ ) White: Output ( － )
Black: Input ( － ) Green: Output ( ＋ )
|
Installations:
Without increasing costs, weighbridge increase 7 big selling point right away!
1. Super shock resistance (the biggest difference points of working principle between column and bridge sensor).
2. It can be used in water (fully sealed structure, it can work 10 meters underwater)
3. It can work in all kinds of dust, fine sand flying up in the air and other severe environment (ball head is not exposed)
4. It can work in the freezing cold environments. (Sensor is hermetically sealed, ball will not freeze)
5. Scale body infinite place can withstand lateral impact (sensor comes with reset function)
6. Long-term accuracy and stability time doubled (because there is no hard spherical indenter resulting indentation produced, little change in the long-term accuracy)
7. It has compatible mounting dimensions with the existing platform sensors in markets, easy maintenance, and reduce the installation requirements (the centring requirement reduced when sensor installed that allows the center shifted laterally 5 mm without affecting the accuracy )
